Category Item
Hardware and peripherals • Storage drives
Note
For the list of compatible drive models,
go to https://www.qnap.com/
compatibility.
• Network cable
Tools • Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Setting Up the NAS
Important
Read all safety requirements and information in Safety Information carefully before setting
up the NAS or installing NAS components.
1. Place your NAS device in an environment that meets the requirements.
For details, see Installation Requirements.
2. Install the drives.
For details, see the following topics:
• Installing 3.5-inch Hard Drives on 3.5-inch Trays
• Installing 2.5-inch Hard Drives and Solid-State Drives on 3.5-inch Trays
For a list of compatible drives and expansion cards, go to https://www.qnap.com/en/compatibility/.
3. Connect the NAS to the network.
4. Optional: Install expansion cards.
For details, see Installing Expansion Cards.
5. Optional: Install memory modules.
For details, see Replacing Memory Modules
6. Optional: Connect the expansion units.
For details, see the following topics:
• Connecting USB Expansion Units
• Connecting SATA JBOD Expansion Units
7. Connect the power cord and all applicable cables.
8. Power on the NAS.
9. Install QTS.
For details, see QTS Installation.
TS-x32PXU User Guide
Product Overview 14
To Next Page
Loading...
Need help?
General
