QNAP TS 32PXU Series User Manual

2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-x32PXU
Designed for an SMB IT environment, the TS-x32PXU is a rackmount NAS powered by a quad-core 1.7 GHz
processor. It features two 10 Gigabit Ethernet SFP+ ports and two 2.5 Gigabit Ethernet ports, which provides
high network bandwidth to streamline file access, backup, media transfer, and team collaboration. The NAS
supports PCIe expandability that adds M.2 SSD caching and 2.5 Gigabit Ethernet and 5 Gigabit Ethernet
bandwidth. The TS-x32PXU RP models are equipped with a redundant power supply to ensure maximum
service uptime.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third-party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Ordering P/N Drive bays Memory Power supply
TS-432PXU-2G 4 2 GB Single
TS-432PXU-RP-2G Redundant
TS-832PXU-4G 8 4 GB Single
TS-832PXU-RP-4G Redundant
TS-1232PXU-RP-4G 12 4 GB Redundant
Component TS-432PXU
TS-432PXU-RP
TS-832PXU
TS-832PXU-RP
TS-1232PXU-RP
Processor
CPU Annapurna Labs AL324
Frequency 4-core 1.7 GHz
Architecture ARM 64-bit
Encryption engine Supported
Memory
Pre-installed
memory
2 GB RAM: 1 x 2 GB
UDIMM DDR4
4 GB RAM: 1 x 4 GB UDIMM DDR4
TS-x32PXU User Guide
Product Overview 4

QNAP TS 32PXU Series Specifications

General

Brand	QNAP
Model	TS 32PXU Series
Category	Storage
Language	English