QNAP TS 32PXU Series User Manual

Component TS-432PXU
TS-432PXU-RP
TS-832PXU
TS-832PXU-RP
TS-1232PXU-RP
Memory slots 1 x Long-DIMM DDR4
Note
• Use only QNAP memory modules to maintain system
performance and stability. For NAS devices with more than one
memory slot, use QNAP modules with identical specifications.
• Using unsupported modules may degrade performance, cause
errors, or prevent the operating system from starting.
Maximum memory 16 GB RAM: 1 x 16 GB
Storage
Drive bays 4 x 3.5-inch SATA 6 Gbps 8 x 3.5-inch SATA 6 Gbps 12 x 3.5-inch SATA 6 Gbps
Note
The drive bays are backward compatible with SATA 3 Gbps.
Drive compatibility 3.5-inch bays:
• 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid-state drives
SSD cache
acceleration
support
Supported
Hot-swapping Supported
Network
10 Gigabit Ethernet
ports
2 x 10 GbE SFP+
2.5 Gigabit
Ethernet ports
2 x 2.5 GbE RJ45
Important
Avoid connecting these ports to Power Sourcing Equipment or a
Power over Ethernet port as it may cause damage to the surge
protection feature.
Wake-on-LAN Yes (2.5 GbE RJ45)
External I/O Ports & Expansion Slots
PCIe slots 1 x PCIe 2.0 x2
Note
PCIe bandwidth limitations may restrict the performance of the
add-on cards.
USB ports 4 x USB 3.2 Gen 1 Type-A
Interface
Buttons • Power
• Reset
Dimensions
TS-x32PXU User Guide
Product Overview 5

QNAP TS 32PXU Series Specifications

General

Brand	QNAP
Model	TS 32PXU Series
Category	Storage
Language	English