4. Install a second handle on the other side of the chassis.
5. Power on the NAS.
Replacing Memory Modules
Use only QNAP modules of the same type and capacity to maintain system performance and stability. You
can purchase QNAP memory modules from authorized resellers.
Warning
• Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the NAS.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the case cover.
• TS-432PXU, TS-432PXU-RP
1. Remove the screws.
2. Lift the cover off the NAS.
TS-x32PXU User Guide
Installation and Configuration 29
To Next Page
Loading...
Need help?
General
