Duration Frequency Description
Long beep (1.5 seconds) 3 (every 5 minutes) • A power error occurred.
• The system fan is not
functioning.
• The fan module has been
removed.
• The installed fan module is
compatible.
• A system fan error occurred.
• The NAS is powered on.
• The NAS has completed
firmware update.
2 • The storage pool is about to
reach full capacity.
• The storage pool has reached
full capacity.
• A storage pool status error
occurred.
• The disk volume is about to
reach its full capacity.
• The disk volume has reached
its full capacity.
• The USB device is being
removed (USB one-touch
copy button).
• A volume status error
occurred.
• The drives are in degraded
mode.
• The user started the drive
rebuilding process.
• A drive is plugged in or out.
• The iSCSI is about to reach
full capacity.
1 • The NAS was powered off by
force shutdown (hardware
shutdown).
• The NAS was powered on
successfully and is ready.
Long and short beeps 1 long and 2 short beeps The JBOD expansion unit has
been removed.
TS-x32PXU User Guide
Basic Operations 50
To Next Page
Loading...
Need help?
General
