QNAP TS-462-2G User Manual

Methods User Actions
Use static IP address a. Select Use static IP address.
The IP address conguration page appears.
b. Specify the following IP address congurations:
• Interface
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS server
• Secondary DNS server
13. Click Next.
The Thunderbolt Connection page appears.
Note
This page only appears if your device supports Thunderbolt. You will need to connect your
device to a computer using a Thunderbolt cable.
14. Click Next.
The Summary screen appears.
15. Review the settings.
16. Click Apply.
A conrmation message appears.
Warning
Clicking Conrm deletes all data on the drive before installing QTS.
17. Click Conrm.
QTS is installed.
Installing QTS Using the Cloud Key
Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
Important
To protect your NAS from brute force attacks, create a new system administrator account
during QTS installation to disable the default "admin" account.
1. Power on the NAS.
2. Connect the NAS to the internet.
3. Go to the QNAP Cloud Installation page using one of the following methods:
• On your computer, go to your respective region's site to download QTS:
• China: https://install.qnap.com.cn
TS-x62, TS-x64 User Guide
Installation and Conguration 50

QNAP TS-462-2G Specifications

General

Chassis type	Tower
Cooling type	Active
Fan diameter	120 mm
Product color	White
LED indicators	Yes
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Type	NAS
Device class	Home & Home Office
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox
RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive capacity	0 GB
Storage drive interface	-
Storage drives installed	No
Number of M.2 (M & B) slots	2
Storage drive sizes supported	3.5, M.2, 2.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA III
Operating system version	5.0.1
Operating system installed	QNAP QTS
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 11, Windows 7, Windows 8
Processor model	N4505
Processor family	Intel® Celeron®
Processor frequency	2 GHz
Processor manufacturer	Intel
Processor boost frequency	2.9 GHz
On-board graphics card model	Intel® UHD Graphics
Number of processors supported	1
Flash memory	4096 MB
Internal memory	2 GB
Memory form factor	SO-DIMM
Internal memory type	DDR4
Maximum RAM supported	16 GB
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
Fan voltage	12 V
AC input voltage	100 - 240 V
Power supply location	Built-in
Power consumption (sleep)	11.3 W
Power consumption (typical)	25.98 W
Power supply unit (PSU) capacity	90 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Depth	226 mm
Width	170 mm
Height	168 mm
Weight	2260 g
Package weight	3600 g