QNAP TS-462-2G User Manual

4. NAS Migration
You can migrate data and settings from your current NAS to another NAS model with minimal disruptions
by installing all the hard drives from the source NAS to the destination NAS. RAID conguration and other
settings are retained on the destination NAS after migration.
NAS Migration Requirements
You can only migrate drives to specic NAS models, depending on your source NAS. For the list of NAS
models compatible with direct NAS migration, see https://www.qnap.com/go/nas-migration.
Your device must meet the following requirements:
• QTS NAS supports several types of NAS migration:
• ARM NAS to an ARM NAS
• x86 NAS to an x86 NAS
• ARM NAS to an x86 NAS
Note
You cannot migrate from an x86 NAS to an ARM NAS.
• The destination NAS must run on the same QTS version as the source NAS (or later).
• The destination NAS must have sucient free drive bays to accommodate all the drives that you are
migrating from the source NAS.
For NAS models that do not support NAS migration, you can migrate existing data using HBS 3. For details,
see Migrating NAS Data Using HBS 3.
Status and Setting Changes after NAS Migration
The status of NAS data and settings varies after migration.
Data and Settings After NAS Migration
Registered myQNAPcloud name Your registered myQNAPcloud name is not migrated.
Encrypted disk volumes If the NAS does not support le system encryption,
encrypted disk volumes are not migrated.
Warning
To prevent data loss, back up and save the
encryption keys of encrypted disk volumes in
a safe place. You can also choose to decrypt
disk volumes before migration.
TS-x62, TS-x64 User Guide
NAS Migration 59

QNAP TS-462-2G Specifications

General

Chassis type	Tower
Cooling type	Active
Fan diameter	120 mm
Product color	White
LED indicators	Yes
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Type	NAS
Device class	Home & Home Office
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox
RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive capacity	0 GB
Storage drive interface	-
Storage drives installed	No
Number of M.2 (M & B) slots	2
Storage drive sizes supported	3.5, M.2, 2.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	4
Supported storage drive interfaces	Serial ATA III
Operating system version	5.0.1
Operating system installed	QNAP QTS
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 11, Windows 7, Windows 8
Processor model	N4505
Processor family	Intel® Celeron®
Processor frequency	2 GHz
Processor manufacturer	Intel
Processor boost frequency	2.9 GHz
On-board graphics card model	Intel® UHD Graphics
Number of processors supported	1
Flash memory	4096 MB
Internal memory	2 GB
Memory form factor	SO-DIMM
Internal memory type	DDR4
Maximum RAM supported	16 GB
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
Fan voltage	12 V
AC input voltage	100 - 240 V
Power supply location	Built-in
Power consumption (sleep)	11.3 W
Power consumption (typical)	25.98 W
Power supply unit (PSU) capacity	90 W
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.

Weight and Dimensions

Depth	226 mm
Width	170 mm
Height	168 mm
Weight	2260 g
Package weight	3600 g