For details, see the following topics:
• Installing 2.5-inch drives on 3.5-inch trays
• Installing 3.5-inch hard drives on 3.5-inch trays
3. Optional: Install expansion cards.
For details, see Installing expansion cards.
4. Optional: Connect expansion units.
For details, see Expansion unit installation.
5. Connect the power cord and all applicable cables.
6. Power on the NAS.
7. Install QTS.
For details, see QTS installation.
8. Log on to QTS.
TS-AI642 User Guide
Product Overview 10
To Next Page
Loading...
