QNAP TS-AI642 - Product Overview; About the TS-AI642; Hardware Specifications

1. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-AI642
The TS-AI642 QNAP NAS includes hardware optimized for dedicated backup jobs, AI-driven applications,
multimedia streaming, and VPN services. The Rockchip RK3588 CPU includes an integrated GPU which oers
an HDMI resolution of up to 4K at 30 Hz, and boosts the performance of AI-driven applications. The TS-AI642
is a multipurpose NAS device suitable as a personal backup server, work-from-home VPN tool, or multimedia
management server.
Hardware specications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N CPU Pre-installed memory Drive bays
TS-AI642 Rockchip RK3588 8 GB RAM 6 x 3.5-inch SATA 6 Gbps
Important
To avoid potential injury or damage to components, do not touch the fans while the NAS is
connected to a power source.
Component TS-AI642
Processor
Frequency 4-core Cortex-A76 2.2 GHz + 4-core Cortex-A55 1.8 GHz
Architecture ARM 64-bit
Encryption engine AES-256
Memory
Memory slots Non-expandable memory
Maximum memory 8 GB RAM (non-expandable)
Flash memory 4 GB (dual-boot OS protection)
Storage
Drive bays 6 x 3.5-inch SATA 6 Gbps
TS-AI642 User Guide
Product Overview 3