2. Installation and Conguration
This chapter provides specic hardware and rmware installation and conguration steps.
Hardware installation
This section provides information on installing drives, installing expansion cards, and connecting expansion
units.
Drive installation
This device is compatible with 3.5-inch hard drives and 2.5-inch solid-state drives.
Installing 2.5-inch drives on 3.5-inch trays
Warning
• Installing a drive deletes all data on the drive.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power o the NAS.
2. Remove the front cover.
a. Locate the locking mechanism on the left side of the NAS.
b. Slide the lock up to release the front cover.
TS-AI642 User Guide
Installation and Conguration 11
To Next Page
Loading...
