QNAP TS-AI642 User Manual

• Password: Specify an administrator password with 1 to 64 characters. The password can contain
any ASCII characters.
• Conrm Password: Enter the new administrator password again.
16. Click Next.
The Set the date and time screen appears.
17. Specify the time zone, date, and time using any of the following methods:
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
Methods User Actions
Synchronize with computer or mobile device time Select Same as the computer/device time
The NAS synchronizes with the date and time of the
computer or mobile device used to complete the
initialization.
Enter manually a. Select Input Manually.
b. Specify the date and time.
The NAS uses the specied date and time.
Synchronize with a time server automatically Click Synchronize with an Internet time server
automatically.
The NAS synchronizes with the NTP server.
18. Click Next.
The Congure the network settings screen appears.
19. Congure the network settings using any of the following methods.
Methods User Actions
Obtain an IP address automatically (DHCP) Select Obtain an IP address automatically (DHCP)
The system automatically detects and congures the
IP address settings.
Use static IP address a. Select Use static IP address.
The IP address conguration page appears.
b. Specify the following IP address congurations:
• Interface
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS server
• Secondary DNS server
20. Click Next.
The Thunderbolt Connection page appears.
TS-AI642 User Guide
Installation and Conguration 32

QNAP TS-AI642 Specifications

General

Brand	QNAP
Model	TS-AI642
Category	Storage
Language	English