QNAP TS-h987XU-RP - Initializing Quts Hero Using Qfinder Pro

Method Description Requirements
Cloud installation If the NAS is connected to the internet,
you can do the following:
• Scan the QR code on the NAS.
• Log into your myQNAPcloud account.
• Use myQNAPcloud Link to remotely
access your NAS.
• Complete the steps in the Smart
Installation Guide wizard.
For details, see Initializing QuTS hero
Using the Cloud Installation Website.
• Computer or mobile device
• Network cable
• myQNAPcloud account
• Cloud Key
Initializing QuTS hero Using Qnder Pro
You can initialize QuTS hero using Qnder Pro, which is an utility designed to help you locate and manage
QNAP devices on your network.
Warning
Installing QuTS hero deletes all data on the drives. Back up your data before proceeding.
1. Power on the device.
2. Connect the device to your local area network.
3. Run Qnder Pro on a computer that is connected to the same local area network.
Note
To download Qnder Pro, go to https://www.qnap.com/utilities.
4. Locate the NAS in the list and then double-click the name or IP address.
The Smart Installation Guide opens in the default web browser.
5. If the screen shows a dierent operating system, click QuTS hero.
Note
This step is only required if the NAS supports installing more than one operating system and
the default operating system for installation is not QuTS hero.
The NAS restarts and the smart installation screen shows QuTS hero as the operating system to install.
6. Click Start Smart Installation Guide.
The Install Firmware window appears.
7. Install rmware using any of the following methods:
Installation methods Steps
Automatic Click Start.
Automatically searches for available rmware updates and installs rmware.
TS-h987XU-RP User Guide
Installation and Conguration 38