QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
14. Click Next.
The Congure the network settings screen appears.
15. Select Obtain an IP address automatically (DHCP).
16. Click Next.
17. Review the settings.
18. Click Apply.
A conrmation message appears.
Warning
Clicking Initialize deletes all data on the drive before installing QuTS hero.
19. Click Initialize.
QuTS hero initialization starts. It may take a few minutes to complete the process.
After the initialization, you can click Go to NAS Management to start using QuTS hero and conguring
other settings.
TS-h987XU-RP User Guide
Installation and Conguration 42
To Next Page
Loading...
