56
TD-001578-01-C
Menu – Security
Security Setup
is used to change the
Admin
Passwords
for the MP Install and MP Manage apps. The
default passwords are shown in the image below. These
should be changed to prevent unauthorized access.
Touch one of the
Set Password
fields to display a
keyboard and enter a new password.
1.
MP Install
– The MP Install password allows access
to and control of all MP-M functions.
2.
MP Manage
– The MP Manage password allows
access to the functions that let a manager grant
access to users of smartphones with the MP Manage
app installed. See the MP Manage and Smartphone
sections of this document for more detail.
3.
MP External Control
– The MP External Control
password allows a control system to authenticate with
the MP-M for external control via Ethernet using its API.
Staff Access Management
The first staff member to access the mixer with MP
Manage app must use the manager password that was
entered by the installer. If the password is forgotten, use
the reset procedure to return the passwords to the factory
defaults. From then on, the associated device is authorized for all access.
Reset Passwords
If Installer and Manager passwords are lost, they may be reset to the factory programmed defaults by pushing and holding the “Reset” pin-hole
switch (located next to the MFC RJ-45 jacks) for
2 seconds
.
Touch
Menu
Touch
Security
3
1
2
To Next Page
Loading...
