quadient AS-850 - Section 2 - Install Printer; Choose a Location; Contents of Packaging

SECTION 2
INSTALLING PRINTER
9
SECTION 2 – Install Printer
Before using Printer:
• Choose a location for Printer and optional Feeder
• Place Feeder and connect it to Printer
• Plug in Printer and Feeder, then connect Printer to computer
• Install Printer Driver on computer
Choose a Location
Place Printer with Feeder on a sturdy worktable or cabinet at least 12" (30.5 cm) from any walls. Allow enough
room to place Feeder on same work surface. Protect Printer from excessive heat, dust, and moisture – avoid
placing it in direct sunlight.
Contents of Packaging
1.
AS-850 Printer
2.
Power Cord
3.
WiFi Antenna
4.
USB Flash Drive (Includes Printer Driver, User
Guide)
5.
USB 3.0 Cable
6.
Network Cable
7.
Media Control Guide (installed in printer)
8.
Exit Pressure Roller Assembly (installed in printer)
9.
Feeder Interface Cable 97E-500-193
For use with AS-850 or AS-980 (Envelope Imager
XT3.0) printer and FDR12/14 (EasyFeed 120/140)
feeder models.
NOTICE: Cable 97E-500-193 was originally made for use with the AS-980 (Envelope Imager XT3.0) printer and
FDR12 (EasyFeed 120) feeder, so the cable may be tagged as such. However, this cable is also compatible for use
with the AS-850 printer and FDR14 (EasyFeed 140) feeder.