General Safety
• Before using your Mailing System, thoroughly read the operating instructions.
• To reduce the risk of fire, electric shock and injury to persons, follow normal and
basic safety precautions for office equipment when using your Mailing System.
• To avoid damage, only use approved supplies (ink, tape, cleaners...).
The Mailing System contains moving parts. Keep fingers, long hair,
jewellery, neck ties and loose clothing away from the mail path at
all times.
Follow the additional safety precautions below:
• Do not place lit candles, cigarettes, cigars, etc. on the Mailing System.
• When removing jammed material, avoid using too much force to prevent personal
injury and damaging components.
• When lifting covers, wait for all parts to stop moving before placing hands near the
feeder path or printhead.
• To prevent overheating do not block the ventilation openings or try to stop the power
supply fans.
• Do not remove bolted covers as they enclose potentially hazardous parts that should
only be accessed by a Service Representative.
LAN Connections
Plugging the right jack in the right socket
Your Mailing System uses a LAN (high speed internet connection) to connect to your
customer Online Services.
8
| Page 8 | Jul-31-2018 12:32 |
1
Read this First