Choosing a Type of Imprint3.1
Customizing Your Imprint
When processing mail you will be required to select the 'Type of imprint' you need. For
example, you can select “Normal” to print postage, or “Received” to print the date on
incoming mail, or “Pass Through” for seal only applications.
For each 'Type of imprint' you select, the Mailing System displays all the specifications -
and only those specifications - for the type of process you will use.
Home Screen and Configuration Menu
Each type of imprint is associated to:
• A specific Home Screen that displays current imprint configuration (weight, postage...).
• A specific Imprint Configuration Menu that allows you to set imprint parameters.
To directly gain access to the Configuration Menu of the Type of
imprint, press Shortcut Key on the Control Panel.
Your system has six Shortcut Keys for direct access to save time.
You can eliminate key strokes for rate selection, job memories,
label printing, add or check credit, weighing type selection and to
customize the imprint.
Type of Process and Type of Imprint
The table below indicates the 'Type of imprint' to choose, depending on the type of process
you want to apply to each set of mail.
The column on the right indicates, for each Type of imprint, the options available for each
type of imprint.
If you do not set any parameter, the Mailing System uses default values.
31
| Page 31 | | Jul-31-2018 12:32 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
