Weighing type
Depending on the type of mail you want to process, choose a weighing method according
to the recommendations in the table below.
Select the method...For weighing...
• Standard WeighingItems one by one
• Differential WeighingItems stacked on the Weighing Platform
• Manual Weight EntryItems exceeding WP capacity (see Mail
Specifications on page 225)
The recommendations in the table only apply to items processed
with the same rate.
The Weighing type icon on the screen indicates the weighing method selected and thus
the source that provides the weight of the mail piece to the system.
Details on the Weighing Type
All weighing options listed below may not be available in your
Mailing System. Check with customer service to see how you can
easily add weighing features to your Mailing System via online
services.
•
Manual Weight Entry
In this mode, you enter the weight manually (see How to Enter the Weight Manually
on page 67).
•
Standard Weighing
In this mode, each mail piece is manually placed on the Weighing Platform, and then
put into the mail path (or print a label).
•
Differential Weighing (optional)
This mode speeds up the weighing process and increases your efficiency: all the
mail pieces are stacked together on the Weighing Platform. Remove the pieces one
by one and put them into the mail path. The Mailing System calculates the postage
and prints the mail piece automatically. You can leave all the mail pieces in a tray
3
Processing Mail
65
| Page 65 | Jul-31-2018 12:32 |
To Next Page
Loading...
Need help?
General
