16
Opening the LCD Panel
To open the LCD panel:
1. Steady the base of the notebook with one hand.
2. Hold a corner of the LCD panel with the other hand.
3. Gently raise the LCD panel to the upright position.
A
Warning
Never slam the LCD panel shut, as this may damage the notebook.
î
Note
Do not grip the web camera when trying to open or close the LCD panel.
Switching the Power On
Once you have connected your AC adapter or charged the battery pack, you
can power on your notebook.
When you power on your notebook, the Power-On Self Test (POST) runs
automatically to check the internal hardware and configuration. After the POST
is completed, your notebook loads the installed operating system.
If hardware configuration has been changed or the POST fails, a warning
message may appear on the screen. This message will inform you of any errors
or invalid settings, and prompt you to run the BIOS Setup Utility to correct the
problem.
To Next Page
Loading...
Need help?
General