錯誤
!
尚未定義樣式。
— Introduction
4
Front Control Panel
1.
Power LED
Power On: solid green
Sleep: blinking green
2.
Status LED Displays status/errors and is controlled by BMC.
Color Condition
Occurrence
Amber Blinking
Non-critical Failure: Fan, voltage, temperature state.
Amber off
OK
3.
NIC1 LED Lights solid green when a connection is made to the NIC1 port, blinks
when NIC1 port is active (access).
4.
NIC2 LED Lights solid green when a connection is made to the NIC2 port, blinks
when NIC2 port is active (access).
5.
HDD Active LED Blinks green for hard drive operation.
6.
System ID LED See table below for behavior.
Color
Condition Occurrence
Blue
Off No identification
Blinking Indicates ID Button pressed on chassis
7.
Power button
Press this button to turn on the QSSC-980 2U.
8.
System ID button Press to light ID LED.
To Next Page
Loading...
