錯誤
!
尚未定義樣式。
— Installing Hardware
20
Installing Memory
The mainboard has twelve DDR3-DIMM slots for the installation of up to twelve memory DIMMS @ DDR3-
1066/1333 memory chips. Refer to QSSC-980 2U Mainboard Components on page 9 for the location of the mem-
ory modules.
Refer to the following instructions to install memory modules:
1. Pull the locking latches of the DIMM slot outwards.
2. Align the memory module correctly. Note the notch and obstruction in the following illustration.
3. Press the edge connector of the memory module into the slot. Press down firmly so that the locking
latches of the DIMM slot are levered upwards to secure the memory module in place.
To Next Page
Loading...
