錯誤
!
尚未定義樣式。
— Installing Hardware
25
Replacing the Power Supply
In case of a power supply failure, you can quickly replace the power supply unit.
Note:
You can also install an optional backup power supply. Contact your dealer for de-
tails. See Installing the Redundant Power Supply on page 18.
Refer to the following instructions to replace the power supply:
1. Grasp the PSU handle
and push in the Lock Release latch
.
2. Pull the PSU out
.
3. Push the new PSU in the direction of the arrow until it sits flush with the chassis and locked in place.
To Next Page
Loading...
