QUANTA QSSC-980 - Third IDE Master

錯誤 ! 尚未定義樣式。 — BIOS
39
Third IDE Master
Configure SATA#1 as IDE and the following screen appears:
BIOS SETUP UTILITY
Advanced
Third IDE Master
Device :Hard Disk
Vendor :ST320410A
Size :20.0GB
LBA Mode :Supported
Block Mode:16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-2
S.M.A.R.T :Supported
Type [Auto]
*1
Select the type of device connected to the
system.
←→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 © Copyright 1985-2005, American Megatrends Inc.
*1
:Not Installed/Auto/CD/DVD/ARMD
Third IDE Master
Device: displays the type of device assigned to this channel.
Vendor: displays the manufacturer’s name of the device.
Size: displays the size of the device (GB).
LBA Mode: indicates whether LBA access mode is supported or not supported.
Block Mode: indicates whether multi sector transfer is supported.
PIO Mode: indicates whether PIO mode is supported.
Async DMA: indicates whether Async DMA is supported.
Ultra DMA: indicates whether Ultra DMA is supported.
S.M.A.R.T.: indicates whether S.M.A.R.T. mode is supported.
LBA/LARGE Mode: enables LBA access mode.
• Disabled: LBA access mode is disabled
• Auto: LBA is set to optimal or default mode if the device supports it and is not formatted with LBA
mode disabled.
Block Mode: enables multi-sector transfer block mode.
• Disabled: data transfer from and to the device occurs one sector at a time
• Auto: data transfer from and to the device occurs multiple sectors at a time if supported by the device