QUANTA QSSC-980 - System Controls and Leds Description

錯誤 ! 尚未定義樣式。 — Introduction
7
System Controls and LEDs Description
Front System Controls
RESET
Reset Button Push to restart the system when the system is powered on.
Identification
Button
Push to clear the ID LED
Power button
Toggles system power. When system is off, push briefly to power on the PSU and
the system. When power is on, push briefly to turn off.
Front System LEDs
Fault LED Displays status/errors and is controlled by BMC.
Color Condition Occurrence
Blinking Critical Failure: critical Fan, Voltage, Tem-
perature state
Non-Critical Failure: non-critical Fan, Volt-
age, Temperature state, CPU Thermal Trip.
Amber
Off OK
NIC2 LED Lights green when a connection is made to the NIC2 port, blinks off when there is
traffic on the NIC2 port.
NIC1 LED Lights green when a connection is made to the NIC1 port, blinks off when there is
traffic on the NIC1 port.
HDD Active LED
Lights for hard drive operation.
Power LED Lights when server is powered on. (This LED is inside the button on the 2.5” option)
Service LED Lights when the BMC port is on, blinks off when there is traffic on the BMC port.
Rear System LEDs
Status
System Status LED Displays status/errors and is controlled by BMC.
Color Condition Occurrence
Blinking Critical Failure: critical Fan, Voltage, Temperature
state
Non-Critical Failure: non-critical Fan, Voltage,
Temperature state, CPU Thermal Trip
Amber
Off OK
System ID LED Lights when front or rear ID button is pressed.
Color Condition Occurrence
Off No Identification requested Blue
On Unit selected for identification
LAN2 LED Link/Act: :Lights green when a connection is made to the NIC2 port, blinks off
when there is traffic on the NIC2 port.
Speed: Lights green when speed is 100 Mbits/sec, Lights Amber when speed is
1000Mbits/sec
LAN1 LED Link/Act: Lights green when a connection is made to the NIC1 port, blinks off
when there is traffic on the NIC1 port.
Speed: Lights green when speed is 100 Mbits/sec, Lights Amber when speed is
1000 Mbits/sec
Service Port Lights when the BMC port is on, blinks off when there is traffic on the BMC port.