QUANTA QSSC-980 - PCI Configuration

錯誤 ! 尚未定義樣式。 — BIOS
43
PCI Configuration
Scroll to this item and press Enter to view the following screen:
BIOS SETUP UTILITY
Advanced
PCI Configuration
NIC1–
––
–KAWELA [Enabled with PXE]*
2
NIC2–
––
–KAWELA [Enabled with PXE]*
2
NIC1 MAC Address [xx-xx-xx-xx-xx-xx]
NIC2 MAC Address [xx-xx-xx-xx-xx-xx]
Current QPI Frequency 6.400GT
QPI Links Speed [Full-Speed]
QPI Frequency [Auto]*
3
QPI L0s and L1 [Disabled]*
1
Crystal Beach / DMA [Disabled]
Intel VT-d [Disabled]
SR-IOV Supported [Disabled]
Active State Power-Management [Disabled]
ME Support [Enabled]*
1
Options
Disabled
Enabled
←→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 ©Copyright 1985-2006, American Megatrends Inc.
*
1
: Disabled/Enabled
*
2
: Disabled/Enabled with PXE/Enable without PXE
*
3
: Auto/4.800GT/5.866GT/6.400GT)
NIC1 – ZOAR: [Disabled][Enabled with PXE][Enabled without PXE]. From IOH PCIE Port.
NIC2 – ZOAR: [Disabled][Enabled with PXE] Enabeld without PXE]. From IOH PCIE Port.
NIC1 MAC Address: Information only. Displays the NIC1 MAC address.
NIC2 MAC Address: Information only. Displays the NIC2 MAC address.
SAS Mezz SWRAID5: [Disabled][Enabled]. This option only be displayed by SAS Mezzanine supported SKU.
Current QPI Frequency: 4.800 GT5.600 GT6.400 GT.
QPI Link Speed: [Slow-Mode][Full-Speed].
QPI Frequency: [Auto][4.800 GT][5.600 GT][6.400 GT].
QPI L0s and L1: [Disabled][Enabled].
Crystal Beach / DMA: [Disabled][Enabled].
Crystal Beach / DCA: [Disabled][Enabled]. It is present if [Crystal Beach / DMA] is [Enabled].
Intel VT-d: [Disabled][Enabled].
SR-IOV Supported: [Disabled][Enabled].
Active State Power- Management: [Disabled][Enabled].
ME Support: [Disabled][Enabled].