QUANTA QSSC-980 - Boot and Device Settings

錯誤 ! 尚未定義樣式。 — BIOS
45
Boot Menu
This page enables you to set POST boot parameters.
Scroll to this item and press Enter to view the following screen:
BIOS SETUP UTILITY
Main Advanced Boot Server Security Exit
Boot Settings
► Boot Settings Configuration
► Boot Device Priority
► Hard Disk Drives
► Network Device
Configure Settings
during System Boots.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 ©Copyright 1985-2006, American Megatrends Inc.
Boot Settings Configuration
Select this item and press Enter to view the following submenu items:
BIOS SETUP UTILITY
Boot
Boot Settings Configuration
Quiet Boot [Disabled] *
1
Bootup Num-Lock [On] *
2
Wait For ‘F1’ If Error [Enabled] *
3
POST Timeout [5 seconds] *
Disabled: Displays
normal POST messages.
Enabled: Displays OEM
Logo instead of POST
Messages.
←→ Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 © Copyright 1985-2006, American Megatrends Inc.
*
1
: Disabled/Enabled
*
2
: Off/On
*
3
: Disabled/Enabled
Quiet Boot: enable this item to display the OEM logo instead of POST messages. When disabled, normal
POST messages appear.