QUANTA QuantaGrid Series User Manual

BMC CONFIGURATION GROUP
3-27
Procedure:
Entering the details in Advanced Active Directory Settings Page
1. Click on Advanced Settings to open the Advanced Active Directory Settings Page.
Figure 3-17. Active Directory Settings Page
2. In the Active Directory Settings Page, enter the following details.
3. Active Directory Authentication: To enable/disable Active Directory, check or
uncheck the Enable checkbox respectively.
4. Specify the Domain Name for the user in the User Domain Name field. e.g. MyDo-
main.com.
Role Group ID
The name that identifies the role group in the Active Directory.
Note:
 Role Group Name is a string of 64 alpha-numeric characters.
 Special symbols (hyphen and underscore) are allowed.
Group Name
This name identifies the role group in Active Directory.
Note:
 Role Group Name is a string of 64 alpha-numeric characters.
 Special symbols (hyphen and underscore) are allowed.
Group Domain
The domain where the role group is located.
Note:
 Domain Name is a string of 255 alpha-numeric characters.
 Special symbols (hyphen and underscore) and dot are allowed.
Group Privilege The level of privilege to assign to this role group.
Add Role Group To add a new role group to the device.
Modify Role Group
To modify that role group. Alternatively, double click on the configured
slot.
Delete Role Group To delete an existing Role Group.
Note:
If you have enabled Active Directory Authentication, enter the required information to access
the Active Directory server.
Table 10: Active Directory Settings Page (Continued)
ITEM DESCRIPTION

QUANTA QuantaGrid Series Specifications

General

Brand	QUANTA
Model	QuantaGrid Series
Category	Server
Language	English