Quantum DXi4700

Installing Components in the Node
Quantum DXi4700 Capacity Upgrade Guide 29
5. Replace the cooling-fan assembly:
a. Align the cooling-fan assembly slots with the guide pins on the chassis (see Figure 19 below).
b. Slide the cooling-fan assembly into the chassis.
c. Lock the cooling-fan assembly into the chassis.
Figure 19: Replacing the Cooling-Fan Assembly
6. Replace the cooling shroud:
a. Align the tabs on the cooling shroud with the securing slots on the chassis (see Figure 20 below).
Figure 20: Replacing the Cooling Shroud
b. Lower the cooling shroud into the chassis until it is firmly seated.