Quantum DXi6900

Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide 330
Figure208:Delete Public Key Page
c. Click Yes.
The "Successfully performed Security action" message appears.
d. Click OK.
The key is removed from the AvailableSSHPublicKeys table.
3. In addition to configuring SSH authentication, the SSH service account may also be configured with
password authentication.
l Select the Allowloginwithpassword check box to enable a password on a CLI administrator or
CLI viewer account
l Clear the Allowloginwithpassword check box to disable a password on a CLI administrator or
CLI viewer account
Enter the following information:
NewPassword Enter the new password.
ConfirmNewPassword Enter the new password again to confirm it.
AdditionalInformation
l Passwords can be up to 20 characters. Alphanumeric characters and special characters are
allowed.
l For accounts enabled with both SSH and password authentication, the DXi system will first
attempt SSH authentication . If there are no keys defined or no client key matches, the DXi
system will fall back to password authentication.
4. Click Apply.
LDAP/AD
The LDAP/AD page allows the DXi6900 system to connect to a Lightweight Directory Access Protocol
(LDAP) or Active Directory (AD) server.