Quantum DXi6900

Chapter 4: Configuration Wizards
Email Alerts Wizard
Quantum DXi6900 User’s Guide 109
Email Alerts Wizard
The EmailAlerts wizard provides guided assistance for configuring the DXi6900 to automatically send
notifications and reports to selected recipients. The wizard helps you configure an outgoing e-mail server.
Then the wizard guides you through the process of specifying e-mail recipients and selecting the
notifications and reports to send to the recipients.
Note:For more information about sending e-mail alerts, see Email on page 287.
To begin the EmailAlerts wizard, on the Wizards menu, click EmailAlerts.
Step 1: About
1. Read the information about the wizard (see Figure 69 below).
2. Click Next to continue.
Note:At any time while using the wizard, you can click Previous to return to the previous step.
Figure69:Email Alerts Wizard: About
Step 2: Server
1. In the HostnameorIPAddress box, enter the hostname or IP address of the outgoing e-mail server
(see Figure 70 on the next page).
Note:When entering IP addresses, never use an address that is in a reserved IP address range.
To see a list of reserved IP address ranges, click the quick tip icon [?] located near the IP address
field.