Quantum DXi6900

Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide 339
Figure216:Data Encryption Page
To enable or disable data encryption:
1. Select an option in the Encryption drop-down box:
None OST data is not encrypted.
DefaultAES128 OST data is encrypted using AES 128-bit encryption.
DefaultAES256 OST data is encrypted using AES 256-bit encryption.
TLSwithAES256 OST data is encrypted using AES 256-bit encryption with Transport Layer
Security (TLS).
Note:AES encryption options are available only if the Data-in-Flight license is installed (see
License Keys on page 366).
2. If you selected the TLSwithAES256 encryption option, you must install the required certificate and
key files on the DXi:
l Certificate File
l Private Key File
l Certificate Authority File
l Rejection List File
The certificate and key files installed on the DXi system must match the files on the OST media server.
For more information on certificate and key files, see the OST Plug-in Installation Instructions (6-
67074).
To install a file, click the Browse button to browse the system and locate the file, and then click Open.
Caution:Installing certificate files requires a system reboot immediately after the changes are
applied. Wait for at least 15 minutes before logging back in.