Chapter 10: Utilities
License Keys
Quantum DXi6900 User’s Guide 370
6. Click the Utilities menu, and then click the LicenseKeys tab.
The LicenseKeys page displays.
7. Enter the license key in the NewKey box, and then click Add.
The license key is added to the system, and the new feature is enabled.
Note:When adding a StorageCapacity license, it may take up to 10 minutes for the system to
recognize the new storage capacity.
Note:When adding a StorageCapacity license, you are prompted to reboot the system. The
new storage capacity will not be available until you reboot the DXi. Make sure to stop all backup,
restore, and replication jobs before rebooting.
Licensing Data-at-Rest Encryption and Obtaining Premium Feature
Keys
DXi6900G1/G2
Data-at-Rest Encryption secures all data stored on the DXi6900 G1/G2, including file data and metadata,
configuration files, and the DXi software and operating system (see Data-at-Rest Encryption on page 341).
DXi6900-S
Data-at-Rest Encryption secures all customer data stored on the DXi6900-S (see Data-at-Rest Encryption
on page 341).
Before you can enable Data-at-Rest Encryption to encrypt hard drives, you must add the Data-at-Rest
Encryption license. In addition, you must upload a Premium Feature Key (PFK) file for each Array module in
the DXi6900. Contact Quantum customer support to obtain a Data-at-Rest Encryption license. After you
obtain the license, you will receive a License Certificate containing an authorization code.
To add the license key and required PFK files to the DXi6900, locate the License Certificate, and then
perform the following steps:
1. Open two Web browser windows on a computer with Internet access.
Note:During this procedure, you can copy and paste required numbers between these two
windows.
a. In one browser, navigate to the Utilities>LicenseKeys page in the DXi remote management
console.
Note that the system serial number and Storage Array Feature IDs display directly above the New
Key box.
b. In the other browser, enter the address for the LicenseKeyManagement Web site (see ):
http://www.quantum.com/licensekeys
2. On the LicenseKeyManagement Web site, perform the following steps: