Quantum DXi6900

Chapter 4: Configuration Wizards
NAS Wizard
Quantum DXi6900 User’s Guide 79
Figure42:NAS Wizard: About
Step 2: Windows
1. Select an option for joining the DXi6900 to the Windows network (see Figure 43 on the next page):
l ActiveDirectory - Add the DXi6900 to a Windows network using Active Directory
l Workgroup - Add the DXi6900 to a workgroup on a Windows network
Note:To disjoin a domain, see Windows Domain on page 212.
2. In the Domain/WorkgroupName box, enter the name of the domain or workgroup the DXi6900 is
joining.
3. (Active Directory only) Enter information about the primary domain controller:
PDCInformation Description
PrimaryDomainController Select an option for the Primary Domain Controller (PDC):
l UseDNSDiscovery - Discover the PDC automatically.
l SpecifyAddress - Enter the fully qualified name or the IP
address of the PDC.
OrganizationUnit (Optional) Enter the name of the organizational unit in the domain.
The DXi6900 will become a member of this organization
AdministratorName Enter Administrator or any user that has the right to join the
domain.
By default, any user belonging to the Administrators group or the
DomainAdmins group has the right to join the domain. In
addition, any user can join the domain if they are specifically
delegated this right by a member of the Administrators group.
AdministratorPassword Enter the password for the user entered above.