Chapter 4: Operations
Status Lights
QuantumLTO-8 HH SAS User’s Guide 39
Off Flashing
(once
per
second)
Off Displaying
error cod
e
Off An error occurred and the drive or
media may require service, or it may
require cleaning. Note the code on
the SCD, then go to Appendix
A,
Error Codes and Messages to
determine the action that is
requ
ired.
Off Flashing Off Displaying
C
Off The drive needs cleaning.
Off Flashing Off Displaying
Function
Code 2 or
Flashing
Off
The drive is updating firmware
1
. The
SCD will display a 2 if using an FUP
cartridge. The SCD will be off if using
the host interface. For more
information, see
Updating firmware
on page 30.
Off Flashing
(twice
per
second)
Off Off Of
f The drive detected an error and is
p
erforming a firmware recovery. It
will reset automatically.
Off On Off Flashing C Off The drive is requesting a cartridge to
be
load
ed.
Off Flashing
(twice
per
second)
Off Off On There
is a drive dump in flash
me
mory.
1
Power should not be removed from the drive until the microcode update is complete. The drive
indicates that the update is complete by resetting and performing POST.
If green
Ready
Status
Light is
and
amb
er
Fault
Status
Light is
and
Encryption
Status
Light is and SCD is
and
SCD Dot
is Meaning
To Next Page
Loading...
Need help?
General
