Quantum LTO-8 HH SAS User Manual

QuantumLTO-7 HH SAS User’s Guide 91
Appendix A
Error Codes and Messages
If the drive detects a permanent error, it will display the error code on
the SCD and flash the Ready light (Ready light will be Off).
• Make note of the SCD error code prior
to removing a cartridge or
clearing the SCD error code.
• If an error occurred with a cartridg
e in the drive, push the Unload
button to eject the cartridge.
• To clear the SCD error code and powe
r cycle the drive, press the
Unload button for ten seconds. A drive dump will be created.
Caution: If the drive detects a permanent error and displays an error
code other than 0, it automatically performs a drive dump.
If you force a drive dump, the existing dump will be
overwritten and data will be lost. After you force a drive
dump, do not turn off the power to the drive or you may
lose the dump data.

Quantum LTO-8 HH SAS Specifications

General

Native Capacity	12TB
Compressed Capacity	30TB
Native Data Transfer Rate	300 MB/s
Buffer Size	1GB
MTBF	250, 000 hours
Media Type	LTO Ultrium 8
Interface	SAS
Compressed Data Transfer Rate	750 MB/s
Encryption	AES 256-bit
Backward Compatibility	LTO-7, LTO-6
Compatibility	LTO-8