Chapter 4 Service Instructions
Models QT-740 & QT-750 - Service Manual
35
OVERVIEW
This chapter is designed to assist the service technician in maintaining the smooth
operation of the table. The table will function reliably when maintained according to
the instructions provided in this chapter. Only properly trained service personnel
should service or maintain this equipment. Safe equipment performance requires the
attention of service personnel who are specifically trained and experienced with medi-
cal x-ray apparatus. Applicable preventive maintenance or any repair service should
be performed by these skilled individuals. Failure to follow manufacturer’s or service
personnel’s recommendations may result in serious injury
WARNING! Personnel engaged in maintenance
activities should exercise normal caution and care
while working with electromechanical equipment.
Before removing or opening any electrical power
panels or covers, verify that the incoming power
supply is turned OFF. In the event maintenance
procedures require power to be supplied to the
unit, extreme care MUST be exercised to insure
the safety of service or other personnel in the
area. When working on the Scissors Assembly, be
sure the Safety Bracket is installed (see Figure
14). Verify that the equipment is properly
grounded before attempting any electrical opera-
tion.
Figure 14. Safety Bracket Installed
SAFETY
BRACKET
To Next Page
Loading...
Need help?
General
