Quattro dp0 - Customization and Image Settings; Auto Rotate and Custom Modes

86
AUTO ROTATE
It is possible to record the vertical image information to images.
The Auto Rotate can be set by [ Capture Settings] (P. 2 8 ) → [Auto
Rotate].
Off
The vertical image information will not be recorded.
On (Default)
The vertical image information will be recorded.
 When vertically orientated images are reviewed, they will automatically
rotate and be displayed vertically.
 When vertically orientated images are reviewed in Sigma Photo Pro,
they will automatically rotate and be displayed vertically.
 When vertically orientated images are rotated by pressing [ Playback
Menu] → [Rotate], this rotated orientation will be stored.
WARNING !!
 If the images are taken while the camera is pointed up or down, the
vertical position information may not be recorded properly.
CUSTOM MODE
It is possible to customize the Custom Mode Setting. (Up to three patterns
can be stored.)
The following settings are available.
 All items in [ Capture Settings] (Blue Tab) (P. 2 8)
 Exposure mode (M, S, A, P) ( P.4 4)
 Setting Value for Aperture / Shutter
 Setting the focus frame ( P.51)
 Exposure compensation ( P.7 8)
SAVE THE CUSTOM MODE SETTING
1
Set the above settings to your desired combination.