Queclink GV300 User Manual

GV300 Manage Tool User Guide
TRACGV300MT001 - 8 -
4） Add mode 14 for AT+GTMUT
5） Add mode3 to <Location By Call> in
AT+GTCFG
6） Add < +RESP:GTEXP> to <Event Mask> in
AT+GTCFG
7） Add parameter <Report Sensor Data>in
AT+GTEFS
8） Add parameter <Server Type> in AT+GTCMS
9） Change the range of <CAN report
interval>and<CAN report interval IGF>to
0|5–86400 in AT+GTCAN
10) Change Bit20 and Bit21 to <Total vehicle
overspeed time> and <Total vehicle engine
overspeed time> in AT+GTCAN
11) Add parameter <Additional Event> in
AT+GTCAN
12) Add sub command 10 and 11 in AT+GTRTO
13) Add FTP to Single AT Command and
Configuration Mask in AT+GTRTO
14) Change bit1 to “+RESP:GTUVN” in<Expand
INF Mask> in AT+GTHRM
15) Delete the related content about AC200
16) Update the support version to
GV300R00A14V08M128_NMX
1.23 2015-3-07 Gricy Wang 1) Add command AT+GTCMD and
AT+GTUDF.
2) Add sub command in AT+GTRTO
to get
software version of CAN100.
3) Add <CAN DATA> for <+RESP MASK> and
<Event Mask> in AT+GTHRM.
4) Add the paremeter <Behavior Duration
> for
AT+GTHBM.
5) Add the parameter <Start Time>, <End Time>
for AT+GTGEO.
GV300R00A15V10M128_NMX
1.24 2015-4-3 Gricy Wang
1） Update the support version to
GV300R00A15V13M128_NMX
Queclink
Confidential

Queclink GV300 Specifications

General

Brand	Queclink
Model	GV300
Category	GPS
Language	English