Need help?Do you have a question about the Quectel 5G Series and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | 5G Series |
| Category | Control Unit |
| Language | English |
Tracks changes to the document over time, including version, date, author, and changes.
Lists the Quectel 5G EVB compatible module series and models.
Provides essential safety precautions for using cellular terminals and modules.
Details the features of the 5G EVB, including interfaces and indicators.
Shows the physical layout and location of components on the EVB.
Illustrates the top and bottom views of the 5G EVB board.
Lists all the accessories included in the 5G EVB kit.
Explains how to power the 5G EVB using an external power adapter.
Describes the interface for connecting the module TE-A to the EVB.
Details the PHY TE-A interface for connecting the AR8035-TE-A.
Explains the USB Type C interface for communication and firmware updates.
Covers digital audio codec and analog audio interfaces for speakers/earphones.
Describes the two push-push type (U)SIM card connectors.
Details the micro SD card interface for memory expansion.
Explains the main and debug UART interfaces for communication.
Describes the PCIe 3.0 signal over USB interface for testing.
Details the function of power switch, PCle config switch, and reset button.
Explains the five status indication LEDs on the EVB.
Covers the Wi-Fi TE-A interface for Wi-Fi module testing.
Describes the twelve antenna interfaces available on the EVB.
Step-by-step guide to power on the 5G EVB module.
Details how to establish communication with the module via USB.
Explains methods for upgrading the module's firmware.
Describes how to reset the module in case of abnormalities.
Outlines the procedures for safely powering down the module.
Lists relevant documents for further information on drivers and tools.
Provides definitions for common terms and abbreviations used in the guide.
To Next Page
