Quectel RG500L EVB - General Overview; Key Features

5G Module Series
RG500L_EVB_User_Guide 9 / 38
2 General Overview
Quectel supplies RG500L EVB for engineers to develop applications based on Quectel 5G RG500L
Series QuecOpen module. This EVB can be used to test basic functionalities of the module.
2.1. Key Features
The following table describes the detailed features of RG500L EVB.
Table 1: Key Features
Features
Description
Power Supply
DC power supply: 12 V ±5 %
Typical: 12 V/ 3 A
Module TE-A Interface
Supporting Quectel RG500L Series QuecOpen
Wi-Fi TE-A Interfaces
⚫ 2.4G Wi-Fi TE-A
⚫ 5G Wi-Fi TE-A or 5G&2.4G Wi-Fi TE-A
SD Card Interface
SD card connector
(U)SIM Card Interfaces
Dual (U)SIM cards supported: 1.8 V and 3.0 V
SLIC TE-A Interface
Supporting SI32185-TE-A or LE9643-TE-A SLIC board
USB Interfaces
USB1 (J1303):
⚫ Debug UART
⚫ For Linux console and log output
⚫ Default baud rate: 921600 bps
USB2 (J1001):
⚫ USB Type-C interface
⚫ USB 3.0 and USB 2.0 supported
⚫ For AT command communication, data transmission and firmware
upgrade
⚫ Default baud rate: 115200 bps
Signal Indication
12 LED indicators are available for signal indication