Quectel RG500L EVB - USB Interfaces (J1001;J1303)

5G Module Series
RG500L_EVB_User_Guide 22 / 38
SLIC-TE-A
interface
LE9643-TE-A
Figure 9: Connection Between LE9643-TE-A and EVB
3.4. USB Interfaces (J1001/J1303)
Two USB Type-C connectors J1001 and J1303 are provided. J1001 complies with USB 3.0/2.0 standard,
and is used for AT command communication, data transmission and firmware upgrade. J1303 is the
debug UART port and is used for Linux console and log output.
Type-C Cable
Figure 10: USB Interface Connection