Quest Engineering Q30 User Manual

16
9. Operaon
Connecng headphones
1. WIRE HEADPHONES. Remove the pro-
tecon cap on the backside of the control
unit and insert the 3.5 mm headphones
cable.
2. QUEST UNDERWATER HEADPHONES.
(oponally available) Remove the protec-
on cap on the backside of the control unit
and insert the 3.5 mm headphones cable
by screwing it into the thread.
3. QUEST WIREFREE HEADPHONES.
Turn on the Wirefree Headphones with
the power buon. Then acvate the
wireless funcon of the detector by pres-
sing the upper buon on the ride side of
the control unit. When the WireFree
symbol lights up constantly, the head-
phones are connected.

Quest Engineering Q30 Specifications

General

Brand	Quest Engineering
Model	Q30
Category	Metal Detector
Language	English