Q-41-MSII-2-EN 8.10 02-02-21
In this display, the following can be modified:
- the program (NP): by actuating keys P+ or P-
- the seam section (NS): by actuating keys S+ or S-
- the cycles: by actuating keys L+ or L-, when no seam section is activated
- the subsequent sewing program via key D+ or D-
- the rated speed of the program: by actuating keys A+ or A-.
This speed is limited via parameter <607>.
Display showing before start when a seam section is activated
In this display, the following can be modified:
- the rated stitchcount S1.x via keys A+/A-/B+/B-
- the rated stitchcount S2.x via keys C+/C-/D+/D-
- the rated stitchcount S3.x via keys L+/L-
- the sewing program (NP) via keys P+/P-
- the seam section (NS) via keys S+/S-
Display showing after start, when <605> = II
Display showing after start, when <605> = I
1 0 1 0 0 1/01 1 2
<
(
(
<
(
(
<
(
(
<
(
(
<
(
(
S1 S2 S3NSNP
Actual speed
Symbol for actual
speed
3580
4
0 1/0 1 1 2
Number of the sewing program (NP)
Rated stitchcount S3.x
Rated stitchcount S2.x
1 0 1 0 xx/01 12
Rated stitchcount S1.x
Seam section (NS)
To Next Page
Loading...