QUICK-ROTAN MINI-STOP Q41MSII - Indication 4: Control Paramerters

Q-41-MSII-2-EN 9.12 02-02-21
Programming of the Sewing Functions
Programming Procedure
- Use keys C>> or C<< to make digits blink; sewing is not possible.
- Use keys V+ or V- to increase or decrease the number of blinking digits.
- Use keys M+ or M- to cause blinking to stop; sewing is possible again.
9.2.4 Indication 4: Control Parameters
parameter number parameter value
programming level
The meaning of the control parameters can be seen from Chapter 11.4 „List of Parameters“.
The control parameters are arranged on three different programming levels (A, B, C).
Programming Level A
Parameters on level A can be accessed when the drive unit is turned ON in the normal way.
A6111
100 1 1010
100 1 1010 100 1 1010
100 1 1
1
10 100 1 1
1
10
100 1 1110 100 1 1110
100 1 1
1
10100 1 1
1
10
100 1 1110 100 1 1110
110 1 1110 110 1 1110
C
<<<<
<<<<
<<
C
>>>>
>>>>
>>
C
<<<<
<<<<
<<
C
>>>>
>>>>
>>
V
−−
−−
−
V
++
++
+
C
<<<<
<<<<
<<
C
>>>>
>>>>
>>
V
++
++
+
V
−−
−−
−
M+/-
M+/-
M+/-
M+/-
M+/-
M+/-
C
<<<<
<<<<
<<
C
>>>>
>>>>
>>