Quickie Attitude Directions For Use

ENGLISH
16
Attitude/Attitude Hybrid Rev.1.0
Before any maitenance is started, turn the battery off and remove it.
NOTE: All Service and Maintenance proceedures carried out on the Add-on Bike require the Battery Locking Key. Without
this key no maintenance is possible.
Checks to be carried out before use:
When What Comments
• Every 4 weeks,
(depending on use).
• Grease the cables where they leave the
switches and the brake levers.
• Check all screw connections are
secure.
• Oil the drive chain.
The following can be done by user or attendant:
• Before oiling, please remove old oil remnants
from the components.
• Spray lightly with Teflon spray.
• Ensure that surplus oil/spray does not
contaminate the surrounding area, (Clothes,
brakes, etc).
• Every 2 - 3 months,
(depending on use).
• Clean regularly.
• Check the unit is clean and in good
condition.
The following can be done by user or attendant:
• Check for cracks in the rubber components.
• Replace any cracked rubber components or
take it to your nearest authorised service centre
for refurbishment.
Maintenance plan 1st inspection 2nd inspec-
tion
Annual inspec-
tions
“250 km
or after 6 month”
“1000 km
or after 1 year”
“every 1000 km /
or every year”
Check all screws / fastening elements are rmly seated X X X
Functional / safety check of all lights (if tted) X X X
Functional / safety check of the docking system (add-
on bike and wheelchair)
X X X
Clean and oil / grease all pivot points and bearings X X
Check function of gearing X X X
“Check function of main and parking brake
(replace cables and brake pads if needed)”
X X X
“Check chain, gear, gear rim for wear and tear
(and replace if needed)”
X X
“Check redirection chain wheel and replace it if needed
(and replace if needed)”
X X
“Visual inspection of the fork and connecting frame for
any damage
(e.g. crack, formation, deformation, etc.)”
X X X
“Visual inspection of the wheelchair frame and back
tubes for any damage
(e.g. crack, formation, deformation, etc.)”
X X X
Check tyres (tread, cracks, damages) and replace if
needed
X X
Check, clean and oil the gear components (including
chain)
X X X
Check the spoke tension and the rim, hub for damag-
es on the add-on bike and the wheelchair
X X X
Check all cable and electrical connectors X X X
Check tightness of steering shaft X X X
7.0 Maintenance

Quickie Attitude Specifications

General

Brand	Quickie
Model	Attitude
Category	Bicycle
Language	English