Quickie Attitude - Warning; 14 Torque; Torque Settings; 15 Technical Data

ENGLISH
18
Attitude Power Rev.1.0
Torque Settings:
Torque in general is 7 Nm, unless otherwise
specified.
The screws used are fitted with threadlock at the factory
and can be adjusted up to 5 times after fitting. After that
they should be replaced or alternatively re-secured with
threadlock to medium tightness..
WARNING!
Secured nuts may only be used once.
Fig.14.1
20 Nm
10 Nm
15.0 Technical Data
General
max user weight 100 kg
Seat width range wheelchair 28-46 cm
Weight (cpl) 13,5kg
Wheelsize 16"
Min Turning radius 270 cm*
Min slope 5° (9%)*
Max. inclination (static) 10°*
Mix. obstacle height 3,5cm*
Max. obstacle height 5cm*
Motor (see also motor section 9
Motor (peak) 250 W
Torque Up to 20 Nm
Range* Up to 30/50 km
Voltage 36 Volt
Speed 6 km/h / 23 kph
Efficiency 65%
Battery (see also battery section)
Battery type Lithium ion
Battery capacity 9 Ah / 13.4 Ah
Protection rating IP 54
Rated voltage 36 V
End-of-charge voltage 42 V
Total energy 482 Wh
Max discharge current 12 A
Ambient operating
temperature
-20 °C to 60 °C
Ambient chargingg
temperature
0 °C to 45 °C
Ambient Storage temperature +10°C to +30°C
Battery weight 2.5 kg
Display (LCD)
Display Monochrome
Display Size (diagonal) 2,4 "
Protection Rating IP 65
Operating temperature -20°C to + 60°C
Charger
Protection Rating IP 65
Input voltage 100-240 VAC 50/60 hz
Operating Temperature 0°C - 40°C
Storage Temperature -40°C - 80°C
* Depending on the wheelchair – add-on bike
combination values can vary e.g. rear wheel
extension, surface conditions, user weight, driving
capability, add-on weight.
Fig.14.2
30 Nm
14.0 Torque