EasyManua.ls Logo

Radio Shack Audio/ Video Remote Control - USING FAVORITE CHANNEL SCAN

Radio Shack Audio/ Video Remote Control
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Need help? Call
1-888-284-8735
14
USING FAVORITE CHANNEL
SCAN
You can program your 6-in-One Remote to scan
through 10 of your favorite channels in either TV,
VCR, or Cable modes.
Note:
You can only maintain a favorite channel list
for one device at a time. You cannot set up a favorite
channel list for another device until you clear the ex-
isting list.
1. Press the device key for the device you want to
scan (
TV
,
VCR
, or
CBL
). The red light blinks.
2. Hold down
P
until the red light blinks twice, then
press
9 9 6
.
3. Enter the first channel number you want to
include in your favorite channel list, then press
P
.
Notes:
Precede a single-digit number with a
0
. For
example,
0 1
,
0 2
, and so on.
If you enter a three-digit number, you do not
need to press
P
after entering the number.
If you use an ENTER key to directly access
channels on your original remote, press
ENTER
after you enter the last digit of a chan-
nel.
4. Repeat Step 3 for up to 9 other channels you
want to include in your list, then hold down
P
until the red light blinks twice.
5. To scan through your favorite channel list, press
the appropriate device key, point the remote at
your device, then press
SCAN
. The remote con-
trol repeatedly scans through the favorite chan-
15-1994.fm Page 14 Tuesday, February 29, 2000 2:04 PM

Related product manuals