EasyManuals Logo
Home>Radio Shack>Remote Control>Audio/ Video Remote Control

Radio Shack Audio/ Video Remote Control User Manual

Radio Shack Audio/ Video Remote Control
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
Need help? Call
1-888-284-8735
7
DEVICE TYPES
You can use the remote control's device keys to con-
trol these types of devices:
TV
— TVs
VCR
— VCRs and TV/VCR combinations, digital
video disc players, laser disc players, cassette
decks, digital audio tape players
CBL/SAT
— cable converters, satellite systems,
video accessories
CD
— CD players
AUX 1
or
AUX 2
— miscellaneous audio devices
(such as graphic equalizers and digital audio
service terminals)
PLUG ’N POWER
— home automation
Note:
To enjoy the full benefit of the Plug ’n Power
feature, you must purchase additional equipment,
available at your local RadioShack store.
SETTING UP YOUR REMOTE
CONTROL
1. Refer to “Manufacturer Codes” on Page 17 and
write down the codes for your devices on the 6-
in-One’s label.
Note:
Some manufacturers have several codes
listed. Try each until you find the right one. See
“Searching for a Code” on Page 48 if you cannot
find the correct code.
2. Turn on your TV.
3. Press the device key for the type of remote you
are replacing (
TV
,
VCR
,
CBL/SAT
,
CD
,
AUX 1
or
15-1994.fm Page 7 Tuesday, February 29, 2000 2:04 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radio Shack Audio/ Video Remote Control and is the answer not in the manual?

Radio Shack Audio/ Video Remote Control Specifications

General IconGeneral
BrandRadio Shack
ModelAudio/ Video Remote Control
CategoryRemote Control
LanguageEnglish

Related product manuals