Radio Shack PRO-160 - Scanner Settings and Customization; Setting Delay and Turning Banks On;Off

64
Additional Information
65
Additional Information
Number of Channels .................................................................................1000
Number of Banks...........................................................................................20
Sensitivity (AM/FM/WFM)
FM .....................................................................20 dB S/N at 3 kHz deviation
28.0000-54.0000.................................................................................... 0.4μV
137.0000-174.0000................................................................................ 0.4μV
216.0000-224.9950................................................................................ 0.4μV
400.0000-512.0000................................................................................ 0.4μV
764.0000-775.9875................................................................................ 0.5μV
794.0000-823.9875................................................................................ 0.5μV
849.0125-868.9875................................................................................ 0.5μV
894.0125-956.0000................................................................................ 0.5μV
1240.0000-1300.0000............................................................................ 0.9μV
AM ................................................................... 20 dB S/N at 60% modulation
25.0000-27.9950.................................................................................... 1.0μV
108.0000-136.9875................................................................................ 1.0μV
225.0000-319.9875................................................................................ 1.0μV
320.0000-399.9875................................................................................ 1.0μV
WFM ......................................................... 20 dB S/N at 22.5 kHz deviation
179.750–215.750 MHz ............................................................................ 0.6 μV
IF Frequencies ............................... 265.55/380.75 MHz, 10.80 MHz, 450 kHz
IF Rejection at 162.40 MHz .....................................................................85 dB
IF Rejection at 453.25 MHz .....................................................................40 dB
Operating Temperature
Normal .................................................................-4° to 140°F (-20° to 60°C)
Signal Stalker I..................................................... 14° to 140°F (-10° to 60°C)
Scan Speed .................................................................... 90 Channels/Second
Search Speed
Normal ...............................................................................90 Steps/Second
Hypersearch............................ 270 Steps/Second (5 kHz step bands only)
Priority Sampling .............................................................................2 Seconds
Delay Time ....................................................................................... 2 Seconds
Antenna Impedance...................................................................................50ȍ
Speaker
Built-in Speaker ............................3 inches (77 mm) 8: Dynamic Type
Audio Output ........................................................................ 2 W maximum
Power
Supplied AC Adapter (12V DC; 500mA; center tip set to positive) or
Optional 12V DC cigarette-lighter adapter (not supplied)
Current Drain
Squelched..........................................................................................125 mA
Full Output.........................................................................................470 mA
Dimensions (HxWxD)................2.25 x 7.46 x 6 inches (56 x 186.6 x 152 mm)
Weight ..............................................................38 oz (1.08 kg) (without case)
Specifications are typical; individual units might vary. Specifications and
depictions are subject to change and improvement without notice.
Troubleshooting
Problem Cause Solution
Scanner is on but will not scan. SQUELCH is not adjusted
correctly.
Adjust SQUELCH.
Only one channel or no chan-
nels are stored.
Store frequencies into more
than one channel.
Scanner won’t work at all. Scanner is not receiving power. Be sure the adapter’s barrel
plug is fully plugged into the
DC 12V 500 mA jack and the AC
or DC adapter is plugged in.
Display is dark. The dimmer setting is set to
dim or off.
Press DIM/M-LOCK to toggle
between bright, dim, or off.
Poor or no reception. Antenna loose. Make sure an antenna is con-
nected to the scanner.
Interference. Move the scanner or antenna
to a better location.