68
Additional Information
Appendix A: Inputting Text
Use the number keypad on the scanner to enter text according to the
alphabet printed at each number key. Press a number key until the scanner
displays the correct letter. Press S or T to move the cursor to the right or
the left. Press FUNC
/
A/a to choose the input mode: Upper case letters,
lower case letters, or numbers.
For example, to enter the word “Scanner.”
1. Press 7/PQRS 4 times to enter “S.”
2. Press FUNC
/
A/a to switch to lower case letters.
3. Then press 2/ABC 3 times to enter “c.”
4. Press S to move cursor.
5. Press 2/ABC 1 times to enter “a.”
6. Press 6/MNO 2 times to enter “n.”
7. Press S to move cursor.
8. Press 6/MNO 2 times to enter “n.”
9. Press 3/DEF 2 times to enter “e.”
10. Press 7/PQRS 3 times to enter “r.”
11. Press ENT/PGM to end your text entry.
Text Input Chart
Number of times key is pressed
Keys 12345678910
11
1.()-+*/@^&
1
2/ABC A B C 2
3/DEF D E F 3
4/GHI G H I 4
5/JKL J K L 5
6/MNO M N O 6
7/PQRS P Q R S 7
8/TUV T U V 8
9/WXYZ W X Y Z 9
0Sp#?_,$%!~‘0
Appendix B: Fleet Maps
Preset Fleet Maps
Block Size Code
1 2345678
0 S11 S4 S4 S12 S4 S3 S10 S1
1 S11 S4 S4 (S12) S4 S10 S10 S1
2 S11 S4 S4 S4 S12 S4 S11 S2
3 S11 S4 S4 S4 (S12) S4 S4 S2
4 S11 S4 S4 S4 S4 S12 S4 S3
5 S11 S4 S4 S4 S4 (S12) S4 S3
6 S11 S4 S12 S4 S4 S12 S4 S4
7 S11 S4 (S12) S4 S4 (S12) S4 S4
Block Size Code
9 10111213141516
0 S4 S0 S4 S0 S3 S4 S4 S3
1 S4 S0 S0 S0 S3 S3 S4 S10
2 S0 S0 S0 S0 S11 S10 S4 S10
3 S0 S0 S0 S0 S4 S4 S11 S11
4 S0 S0 S0 S0 S4 S4 S11 S0
5 S0 S0 S0 S0 S0 S4 S0 S0
6 S0 S4 S0 S0 S0 S12 S12 S12
7 S0 S4 S0 S4 S0 (S12) (S12) (S12)
User Defined Fleet Maps
When a Type I system is designed, the address information for all the IDs are
divided into 8 equal sized blocks. When you program your scanner to track
a Type I system, you must select a size code for each of these blocks. When
you have assigned a size code to all 8 blocks, you have defined the Fleet
Map for the system you’re tracking. Each size code determines the number
of Fleets, Subfleets, and IDs each block will have.
For example, a size code of “4” has one Fleet, which is divided into 16
separate Subfleets, and it has a total of 512 individual IDs.
When a block is assigned a size code, the Fleet or Fleets created within the
To Next Page
Loading...
